Navigation
SEARCH
TOOLBOX
LANGUAGES
modified on 27 March 2012 at 14:10 ••• 12,678 views

CooCox Flash Programmer Download

From Manuals

Revision as of 14:10, 27 March 2012 by Support (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The standalone CooCox flash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps:

  • 1. Open the CooCox flash programmer
Flash Programmer
Figure 2.9: Flash Programmer
  • 2. Select picoJTAG as the Adpater
  • 3. Select the microcontroller being used
  • 4. Select the Command tab
  • 5. Browse for the binary or elf file
  • 6. Verify that the sector offset and sectors are properly selected. See below figures for further details
Flash Programmer
Figure 2.10: CooCox Flash Programmer set-up for Eagle SBC with bootloader
Flash Programmer
Figure 2.11: CooCox Flash Programmer set-up for Eagle SBC without bootlader
Flash Programmer
Figure 2.2: CooCox Flash Programmer set-up for Lincoln SBC
  • 7. Click on the Program button
Retrieved from "https://wiki3.micromint.com/index.php/CooCox_Flash_Programmer_Download"