03-02 FlashingLEDspleLED
From Manuals
This example alternately flashes LEDs connected to pins D0 and D1 on connector J9 of the BAM210.
Please see schematic below for further details.
Schematic for example 03-02
/*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
*/
#include "mbed.h"
DigitalOut redled(D0); //define and name a digital output on pin D0
DigitalOut greenled(D1); //define and name a digital output on pin D1
/*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
*/
#include "mbed.h"
DigitalOut redled(D0); //define and name a digital output on pin D0
DigitalOut greenled(D1); //define and name a digital output on pin D1
int main()
{
while(1) {
redled = 1;
greenled = 0;
wait(0.2);
redled = 0;
greenled = 1;
wait(0.2);
}
}
The following image shows the built circuit.
