Navigation
SEARCH
TOOLBOX
LANGUAGES
modified on 7 October 2014 at 12:32 ••• 49,647 views

Bambino-210 Manual/Appendix B

From Manuals

Revision as of 12:32, 7 October 2014 by Support (Talk | contribs)
Jump to: navigation, search

Appendix B - Using an External JTAG with the BAM210

  • 1. Locate the LPC11U35 Virtual COM Port Binary
  • 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable. A Image:CRP_DISABLED.png drive should appear.
  • 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
  • 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted
  • 5. Verify that the MBED disk comes up
  • 6. Finished!

PREVIOUS: Appendix A

Retrieved from "https://wiki3.micromint.com/index.php/Bambino-210_Manual/Appendix_B"