Bambino-210 Manual/Appendix A
From Manuals
(Difference between revisions)
| Line 8: | Line 8: | ||
* 6. Finished! | * 6. Finished! | ||
---- | ---- | ||
| + | [[Bambino-210_Manual/Appendix B|NEXT: Appendix B - Using an External JTAG with the BAM210]] | ||
| + | |||
[[Bambino-210_Manual/References|PREVIOUS: References]] | [[Bambino-210_Manual/References|PREVIOUS: References]] | ||
Revision as of 16:46, 21 January 2015
Appendix A - Updating CMSIS-DAP Firmware
- 1. Locate the updated CMSIS-DAP binary file
- 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB1 Cable. A
drive should appear. 
- 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
- 4. Reboot the Interface by disconnecting and reconnecting the USB1 cable without JP3 shorted
- 5. Verify that the MBED disk comes up
- 6. Finished!
