03-02 FlashingLEDspleLED

From Manuals

Revision as of 15:30, 17 September 2014

Alternately flashes LEDs connected to pins D0 and D1 on connector J9 of the BAM210. Please see schematic below for further details.

 /*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
                                             */
 #include "mbed.h"
 DigitalOut redled(D0);     //define and name a digital output on pin D0
 DigitalOut greenled(D1);   //define and name a digital output on pin D1
 
 int main()
 {
     while(1) {
         redled = 1;
         greenled = 0;
         wait(0.2);
         redled = 0;
         greenled = 1;
         wait(0.2);
     }
 }

Schematic for example 03-02

The following image shows the built circuit.

 /*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
                                             */
 #include "mbed.h"
 DigitalOut redled(D0);     //define and name a digital output on pin D0
 DigitalOut greenled(D1);   //define and name a digital output on pin D1
 
 int main()
 {
     while(1) {
         redled = 1;
         greenled = 0;
         wait(0.2);
         redled = 0;
         greenled = 1;
         wait(0.2);
     }

}