Navigation
SEARCH
TOOLBOX
LANGUAGES
modified on 5 April 2012 at 15:23 ••• 12,686 views

CooCox Flash Programmer Download

From Manuals

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
-
The standalone CooCox CoFlash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps:  
+
The standalone CooCox CoFlash programmer can be used to program Cortex M microcontrollers using the picoJTAG by following these steps:  
* 1. Open the CoFlash programmer  
* 1. Open the CoFlash programmer  

Revision as of 15:17, 5 April 2012

The standalone CooCox CoFlash programmer can be used to program Cortex M microcontrollers using the picoJTAG by following these steps:

  • 1. Open the CoFlash programmer
Flash Programmer
Figure 2.9: Flash Programmer
  • 2. Select picoJTAG as the Adpater
  • 3. Select the microcontroller being used
  • 4. Select the Command tab
  • 5. Browse for the binary or elf file
  • 6. Verify that the sector offset and sectors are properly selected. See below figures for further details
Flash Programmer
Figure 2.10: CoFlash Programmer set-up for Eagle SBC with bootloader
Flash Programmer
Figure 2.11: CoFlash Programmer set-up for Eagle SBC without bootlader
Flash Programmer
Figure 2.2: CoFlash Programmer set-up for Lincoln SBC
  • 7. Click on the Program button
Retrieved from "https://wiki3.micromint.com/index.php/CooCox_Flash_Programmer_Download"