CooCox Flash Programmer Download
From Manuals
(Difference between revisions)
Support (Talk | contribs)
(Created page with 'The standalone CooCox flash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps: * 1. Open the CooCox flash programmer [[Im…')
Newer edit →
(Created page with 'The standalone CooCox flash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps: * 1. Open the CooCox flash programmer [[Im…')
Newer edit →
Revision as of 14:10, 27 March 2012
The standalone CooCox flash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps:
- 1. Open the CooCox flash programmer
Figure 2.9: Flash Programmer
- 2. Select picoJTAG as the Adpater
- 3. Select the microcontroller being used
- 4. Select the Command tab
- 5. Browse for the binary or elf file
- 6. Verify that the sector offset and sectors are properly selected. See below figures for further details
Figure 2.10: CooCox Flash Programmer set-up for Eagle SBC with bootloader
Figure 2.11: CooCox Flash Programmer set-up for Eagle SBC without bootlader
Figure 2.2: CooCox Flash Programmer set-up for Lincoln SBC
- 7. Click on the Program button