03-02 FlashingLEDspleLED
From Manuals
(Difference between revisions)
| Line 29: | Line 29: | ||
wait(0.2); | wait(0.2); | ||
} | } | ||
| - | + | } | |
Revision as of 15:43, 17 September 2014
Alternately flashes LEDs connected to pins D0 and D1 on connector J9 of the BAM210. Please see schematic below for further details.
Schematic for example 03-02
The following image shows the built circuit.
/*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
*/
#include "mbed.h"
DigitalOut redled(D0); //define and name a digital output on pin D0
DigitalOut greenled(D1); //define and name a digital output on pin D1
/*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
*/
#include "mbed.h"
DigitalOut redled(D0); //define and name a digital output on pin D0
DigitalOut greenled(D1); //define and name a digital output on pin D1
int main()
{
while(1) {
redled = 1;
greenled = 0;
wait(0.2);
redled = 0;
greenled = 1;
wait(0.2);
}
}