03-02 FlashingLEDspleLED
From Manuals
(Difference between revisions)
| Line 1: | Line 1: | ||
Alternately flashes LEDs connected to pins D0 and D1 on connector J9. Please see schematic below for further details. | Alternately flashes LEDs connected to pins D0 and D1 on connector J9. Please see schematic below for further details. | ||
| + | |||
| + | /*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern | ||
| + | */ | ||
| + | #include "mbed.h" | ||
| + | DigitalOut redled(D0); //define and name a digital output on pin D0 | ||
| + | DigitalOut greenled(D1); //define and name a digital output on pin D1 | ||
| + | |||
| + | int main() | ||
| + | { | ||
| + | while(1) { | ||
| + | redled = 1; | ||
| + | greenled = 0; | ||
| + | wait(0.2); | ||
| + | redled = 0; | ||
| + | greenled = 1; | ||
| + | wait(0.2); | ||
| + | } | ||
| + | } | ||
[[Image:BAM210_flashLED.jpeg|center|]] | [[Image:BAM210_flashLED.jpeg|center|]] | ||
Revision as of 14:38, 14 August 2014
Alternately flashes LEDs connected to pins D0 and D1 on connector J9. Please see schematic below for further details.
/*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
*/
#include "mbed.h"
DigitalOut redled(D0); //define and name a digital output on pin D0
DigitalOut greenled(D1); //define and name a digital output on pin D1
int main()
{
while(1) {
redled = 1;
greenled = 0;
wait(0.2);
redled = 0;
greenled = 1;
wait(0.2);
}
}
Schematic for example 03-02