Navigation
SEARCH
TOOLBOX
LANGUAGES
modified on 5 April 2012 at 15:23 ••• 12,676 views

CooCox Flash Programmer Download

From Manuals

(Difference between revisions)
Jump to: navigation, search
(Created page with 'The standalone CooCox flash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps: * 1. Open the CooCox flash programmer [[Im…')
Line 1: Line 1:
-
The standalone CooCox flash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps:  
+
The standalone CooCox CoFlash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps:  
-
* 1. Open the CooCox flash programmer  
+
* 1. Open the CoFlash programmer  
[[Image:picojtag-flash1.png|center|frame|alt=Flash Programmer|Figure 2.9: Flash Programmer]]
[[Image:picojtag-flash1.png|center|frame|alt=Flash Programmer|Figure 2.9: Flash Programmer]]
* 2. Select picoJTAG as the Adpater
* 2. Select picoJTAG as the Adpater
Line 9: Line 9:
* 6. Verify that the sector offset and sectors are properly selected. See below figures for further details
* 6. Verify that the sector offset and sectors are properly selected. See below figures for further details
-
[[Image:picojtag-flash-eagle-boot.png|center|frame|alt=Flash Programmer|Figure 2.10: CooCox Flash Programmer set-up for Eagle SBC with bootloader]]
+
[[Image:picojtag-flash-eagle-boot.png|center|frame|alt=Flash Programmer|Figure 2.10: CoFlash Programmer set-up for Eagle SBC with bootloader]]
-
[[Image:picojtag-flash-eagle-no-boot.png|center|frame|alt=Flash Programmer|Figure 2.11: CooCox Flash Programmer set-up for Eagle SBC without bootlader]]
+
[[Image:picojtag-flash-eagle-no-boot.png|center|frame|alt=Flash Programmer|Figure 2.11: CoFlash Programmer set-up for Eagle SBC without bootlader]]
-
[[Image:picojtag-flash-lincoln.png|center|frame|alt=Flash Programmer|Figure 2.2: CooCox Flash Programmer set-up for Lincoln SBC]]
+
[[Image:picojtag-flash-lincoln.png|center|frame|alt=Flash Programmer|Figure 2.2: CoFlash Programmer set-up for Lincoln SBC]]
* 7. Click on the Program button
* 7. Click on the Program button

Revision as of 14:16, 27 March 2012

The standalone CooCox CoFlash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps:

  • 1. Open the CoFlash programmer
Flash Programmer
Figure 2.9: Flash Programmer
  • 2. Select picoJTAG as the Adpater
  • 3. Select the microcontroller being used
  • 4. Select the Command tab
  • 5. Browse for the binary or elf file
  • 6. Verify that the sector offset and sectors are properly selected. See below figures for further details
Flash Programmer
Figure 2.10: CoFlash Programmer set-up for Eagle SBC with bootloader
Flash Programmer
Figure 2.11: CoFlash Programmer set-up for Eagle SBC without bootlader
Flash Programmer
Figure 2.2: CoFlash Programmer set-up for Lincoln SBC
  • 7. Click on the Program button
Retrieved from "https://wiki3.micromint.com/index.php/CooCox_Flash_Programmer_Download"