CooCox Flash Programmer Download
From Manuals
(Difference between revisions)
(Created page with 'The standalone CooCox flash programmer can be used to program Cortex M microcontrollers using the picoJTAG by folloiwng these steps: * 1. Open the CooCox flash programmer [[Im…') |
|||
| (2 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
| - | + | CooCox CoFlash is a stand-alone Cortex M Flash Programming software for PCs running Microsoft Windows. It can be downloaded from the following website: http://www.coocox.org/CoFlash_Programmer.htm | |
| - | * 1. Open the | + | Follow these steps to program a Cortex M microcontroller using CoFlash and the picoJTAG: |
| + | |||
| + | * 1. Open the CoFlash programmer | ||
[[Image:picojtag-flash1.png|center|frame|alt=Flash Programmer|Figure 2.9: Flash Programmer]] | [[Image:picojtag-flash1.png|center|frame|alt=Flash Programmer|Figure 2.9: Flash Programmer]] | ||
* 2. Select picoJTAG as the Adpater | * 2. Select picoJTAG as the Adpater | ||
| Line 9: | Line 11: | ||
* 6. Verify that the sector offset and sectors are properly selected. See below figures for further details | * 6. Verify that the sector offset and sectors are properly selected. See below figures for further details | ||
| - | [[Image:picojtag-flash-eagle-boot.png|center|frame|alt=Flash Programmer|Figure 2.10: | + | [[Image:picojtag-flash-eagle-boot.png|center|frame|alt=Flash Programmer|Figure 2.10: CoFlash Programmer set-up for Eagle SBC with bootloader]] |
| - | [[Image:picojtag-flash-eagle-no-boot.png|center|frame|alt=Flash Programmer|Figure 2.11: | + | [[Image:picojtag-flash-eagle-no-boot.png|center|frame|alt=Flash Programmer|Figure 2.11: CoFlash Programmer set-up for Eagle SBC without bootlader]] |
| - | [[Image:picojtag-flash-lincoln.png|center|frame|alt=Flash Programmer|Figure 2.2: | + | [[Image:picojtag-flash-lincoln.png|center|frame|alt=Flash Programmer|Figure 2.2: CoFlash Programmer set-up for Lincoln SBC]] |
* 7. Click on the Program button | * 7. Click on the Program button | ||
Current revision as of 15:23, 5 April 2012
CooCox CoFlash is a stand-alone Cortex M Flash Programming software for PCs running Microsoft Windows. It can be downloaded from the following website: http://www.coocox.org/CoFlash_Programmer.htm
Follow these steps to program a Cortex M microcontroller using CoFlash and the picoJTAG:
- 1. Open the CoFlash programmer
Figure 2.9: Flash Programmer
- 2. Select picoJTAG as the Adpater
- 3. Select the microcontroller being used
- 4. Select the Command tab
- 5. Browse for the binary or elf file
- 6. Verify that the sector offset and sectors are properly selected. See below figures for further details
Figure 2.10: CoFlash Programmer set-up for Eagle SBC with bootloader
Figure 2.11: CoFlash Programmer set-up for Eagle SBC without bootlader
Figure 2.2: CoFlash Programmer set-up for Lincoln SBC
- 7. Click on the Program button