Bambino-210 Manual/Appendix C
From Manuals
(Difference between revisions)
(→Configuring Keil µVision Compiler) |
|||
| (2 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
| - | [[Category: Bambino-210_Manual| | + | [[Category: Bambino-210_Manual|C]] |
==Appendix C - Configuring Keil MDK for CMSIS-DAP== | ==Appendix C - Configuring Keil MDK for CMSIS-DAP== | ||
| - | |||
Please follow these steps for setting up Keil µVision compiler for debugging the Micromint Bambino using the mbed HDK with CMSIS-DAP firmware. | Please follow these steps for setting up Keil µVision compiler for debugging the Micromint Bambino using the mbed HDK with CMSIS-DAP firmware. | ||
* 1. Press ALT and F7 on the keyboard to bring up the Options for Target window. | * 1. Press ALT and F7 on the keyboard to bring up the Options for Target window. | ||
| Line 15: | Line 14: | ||
[[Image:mbed-dap-3.png|center]] | [[Image:mbed-dap-3.png|center]] | ||
---- | ---- | ||
| + | [[Bambino-210_Manual/Appendix D|NEXT: Appendix D - DFU Firmware Updates]] | ||
| + | |||
[[Bambino-210_Manual/Appendix B|PREVIOUS: Appendix B - Using an External JTAG with the BAM210]] | [[Bambino-210_Manual/Appendix B|PREVIOUS: Appendix B - Using an External JTAG with the BAM210]] | ||
Current revision as of 14:01, 1 June 2015
Appendix C - Configuring Keil MDK for CMSIS-DAP
Please follow these steps for setting up Keil µVision compiler for debugging the Micromint Bambino using the mbed HDK with CMSIS-DAP firmware.
- 1. Press ALT and F7 on the keyboard to bring up the Options for Target window.
- 2. Click on the "Debug" tab.
- 3. Choose the "CMSIS_DAP Debugger" from the drop down in the upper right hand side of the window. Specify the location of the LPC43xx_spifi.ini initialization file.
- 4. Click on "Settings" next to where the debugger was selected to bring up the Target Driver Setup window. Select "JTAG" for multi-core debugging.
- 5. Click on the "Flash Download" tab.
- 6. Click the "Add" button.
- 7. Scroll and select "LPC18xx/43xx S25FL032 SPIFI".
- 8. Change the "Size" to 0x4000 and the Target Driver Setup window should look like the image below.
NEXT: Appendix D - DFU Firmware Updates
PREVIOUS: Appendix B - Using an External JTAG with the BAM210