Navigation
SEARCH
TOOLBOX
LANGUAGES
modified on 1 June 2015 at 14:01 ••• 49,580 views

Bambino-210 Manual/Appendix B

From Manuals

(Difference between revisions)
Jump to: navigation, search
(→Appendix B - Using an External JTAG with the BAM210)
(→Appendix B - Using an External JTAG with the BAM210)
Line 1: Line 1:
[[Category: Bambino-210_Manual|09]]
[[Category: Bambino-210_Manual|09]]
==Appendix B - Using an External JTAG with the BAM210==
==Appendix B - Using an External JTAG with the BAM210==
 +
The JTAG connector is optional for the BAM210 and must be populated in order to use and external JTAG.
 +
 +
Follow these instructions to use an external JTAG on the BAM210.
* 1. Locate the [[Bambino_Documentation#System Files - mbed|LPC11U35 Virtual COM Port Binary]]
* 1. Locate the [[Bambino_Documentation#System Files - mbed|LPC11U35 Virtual COM Port Binary]]
* 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable to USB1. A [[Image:CRP_DISABLED.png]] drive should appear. [[Image:BAM210E_CRP_DISABLED.png|center]]
* 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable to USB1. A [[Image:CRP_DISABLED.png]] drive should appear. [[Image:BAM210E_CRP_DISABLED.png|center]]
Line 9: Line 12:
The JTAG connector now free to use with an external JTAG. A virtual COM port is now available to use on USB1.  
The JTAG connector now free to use with an external JTAG. A virtual COM port is now available to use on USB1.  
-
The signals used for LPC4330 and the virtual COM port are listed below:
+
The LPC4330 signals used for the virtual COM port are listed below:
{| border="1" cellpadding="5" cellspacing="2" align="center" style="text-align: center;"
{| border="1" cellpadding="5" cellspacing="2" align="center" style="text-align: center;"
|+ align="bottom"|'''Signals Used for Virtual COM Port'''
|+ align="bottom"|'''Signals Used for Virtual COM Port'''

Revision as of 13:13, 7 October 2014

Appendix B - Using an External JTAG with the BAM210

The JTAG connector is optional for the BAM210 and must be populated in order to use and external JTAG.

Follow these instructions to use an external JTAG on the BAM210.

  • 1. Locate the LPC11U35 Virtual COM Port Binary
  • 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable to USB1. A Image:CRP_DISABLED.png drive should appear.
  • 3. Program the Interface firmware by deleting the firmware.bin file and copy lpc11u35_vcom.bin to the CRP DISABLED disk.
  • 4. Reboot the Interface by disconnecting and reconnecting the USB1 cable without JP3 shorted.
  • 5. Finished!

The JTAG connector now free to use with an external JTAG. A virtual COM port is now available to use on USB1.

The LPC4330 signals used for the virtual COM port are listed below:

Signals Used for Virtual COM Port
LPC4330 PIN NAME MBED ALIAS
P2_10 USBTX
P2_11 USBRX

PREVIOUS: Appendix A

Retrieved from "https://wiki3.micromint.com/index.php/Bambino-210_Manual/Appendix_B"