03-02 FlashingLEDspleLED
From Manuals
(Difference between revisions)
| Line 1: | Line 1: | ||
| - | + | This example alternately flashes LEDs connected to pins D0 and D1 on connector J9 of the BAM210. | |
| + | Please see schematic below for further details. | ||
[[Image:BAM210_03_02_SCH.png|center|alt=BAM210|frame|<div align="center">'''Schematic for example 03-02''']] | [[Image:BAM210_03_02_SCH.png|center|alt=BAM210|frame|<div align="center">'''Schematic for example 03-02''']] | ||
Revision as of 17:14, 17 September 2014
This example alternately flashes LEDs connected to pins D0 and D1 on connector J9 of the BAM210.
Please see schematic below for further details.
Schematic for example 03-02
/*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
*/
#include "mbed.h"
DigitalOut redled(D0); //define and name a digital output on pin D0
DigitalOut greenled(D1); //define and name a digital output on pin D1
/*Program Example 3.2: Flashes red and green LEDs in simple time-based pattern
*/
#include "mbed.h"
DigitalOut redled(D0); //define and name a digital output on pin D0
DigitalOut greenled(D1); //define and name a digital output on pin D1
int main()
{
while(1) {
redled = 1;
greenled = 0;
wait(0.2);
redled = 0;
greenled = 1;
wait(0.2);
}
}
The following image shows the built circuit.
