Navigation
SEARCH
TOOLBOX
LANGUAGES
modified on 3 September 2013 at 18:30 ••• 83,879 views

Bambino-200 Manual/Updating Firmware

From Manuals

(Difference between revisions)
Jump to: navigation, search
(→Updating Firmware)
Line 2: Line 2:
==Updating Firmware==
==Updating Firmware==
-
[[Image:Bam200-JP1.png|center|alt=Boot Jumper (JP1)|frame|<div align="center">'''Figure 2.3-1: Boot Jumper (JP1)]]
+
[[Image:Bam200-JP1.png|center|alt=Boot Jumper (JP1)|frame|<div align="center">'''Figure 4-1: Boot Jumper]]
-
[[Image:LPC-USB.png|center|alt=LPC USB Device|frame|<div align="center">'''Figure 2.3-2: LPC USB device]]
+
[[Image:LPC-USB.png|center|alt=LPC USB Device|frame|<div align="center">'''Figure 4-2: LPC USB device]]
-
[[Image:LPC-DFU.png|center|alt=LPC DFU Flash Programmer|frame|<div align="center">'''Figure 2.3-3: LPC DFU Flash Programmer]]
+
[[Image:LPC-DFU.png|center|alt=LPC DFU Flash Programmer|frame|<div align="center">'''Figure 4-3: LPC DFU Flash Programmer]]
----
----

Revision as of 15:08, 26 June 2013

Updating Firmware

Boot Jumper (JP1)
Figure 4-1: Boot Jumper
LPC USB Device
Figure 4-2: LPC USB device
LPC DFU Flash Programmer
Figure 4-3: LPC DFU Flash Programmer

NEXT: Hardware

PREVIOUS: Getting Started - mbed Applications
Retrieved from "https://wiki3.micromint.com/index.php/Bambino-200_Manual/Updating_Firmware"