• 216.73.216.150
• /
• Talk for this IP
• /
• Log in

Bambino-200 Manual/Updating Firmware

From Manuals

(Difference between revisions)

Jump to: navigation, search

Revision as of 04:54, 26 June 2013 (view source) Support (Talk | contribs) ← Older edit		Revision as of 15:05, 26 June 2013 (view source) Support (Talk | contribs) (→Updating Firmware) Newer edit →
Line 2:		Line 2:
	==Updating Firmware==		==Updating Firmware==
-	[[Image:Bam200-JP1.png|center|alt=Bambino 200 Boot Jumper|frame|<div align="center">'''Figure 2.3-1: Bambino 200 Boot Jumper (JP1)]]	+	[[Image:Bam200-JP1.png|center|alt=Boot Jumper (JP1)|frame|<div align="center">'''Figure 2.3-1: Boot Jumper (JP1)]]
	[[Image:LPC-USB.png|center|alt=LPC USB Device|frame|<div align="center">'''Figure 2.3-2: LPC USB device]]		[[Image:LPC-USB.png|center|alt=LPC USB Device|frame|<div align="center">'''Figure 2.3-2: LPC USB device]]

---

Revision as of 15:05, 26 June 2013

Updating Firmware

Figure 2.3-1: Boot Jumper (JP1)

Figure 2.3-2: LPC USB device

Figure 2.3-3: LPC DFU Flash Programmer

---

NEXT: Hardware

PREVIOUS: Getting Started - mbed Applications

Retrieved from "https://wiki3.micromint.com/index.php/Bambino-200_Manual/Updating_Firmware"

Category: Bambino-200 Manual

• Printable version
• /
• About Manuals
• /
• Disclaimers
• /
• Powered by MediaWiki