Lincoln CMSIS Examples

From Manuals

Current revision as of 16:06, 12 April 2012

The Micromint Lincoln includes an extensive set of code examples using CMSIS to help you get started with your applications. A zip file of the examples can be downloaded from the Software Updates section of the Lincoln Wiki. This table summarizes the examples available for different models of the Lincoln line. Our support staff ( support@micromint.com) can assist you with questions on specific functions.

Lincoln Examples

Example	Description	Lincoln 60E	Lincoln 60
adc_burst	Demonstrates ADC conversions in burst mode with multiple inputs.
adc_dma	Demonstrates ADC conversions and transfer converted data by using the DMA.
adc_hardware_trigger	Analog to Digital Converter
adc_int	Demonstrates triggering an Analog to Digital Conversion using an digital input.
adc_polling	Demonstrates Analog to Digital conversions using the polling method.
bitband	Demonstrates the bit-banding feature of the Cortex-M3 processor.
mpu	Demonstrates the MPU (Memory Protection Unit) feature of the Cortex-M3 processor.
privilege_mode	Demonstrates the privilege mode feature of the Cortex-M3 processor.
can_twokit	CAN Bus exercise	(*)	(*)
dac_dma	Demonstrates DMA transfers data to 10 bit DAC.
dac_sinewave_test	Generating a sine wave using the 10-bit DAC.
dac_wavegenerate	Generating a sine, a triangle, or a escalator wave.
emac_easyweb	Displays ADC channel 0 and 1 as a bar graph on a webpage.
uip_webserver	Simple uIP web server
raw	Tests test the EMAC driver with a raw packet frame format.
gpdma_flash2ram	Demonstrates transferring data from Flash to Ram memory.
gpdma_linklist	Demonstrates how to use a link list with the genral purpose DMA.
gpdma_ram2ram	Demonstrates transferring data from a location in RAM to a new location in RAM memory.
gpdma_sleep	Demonstrates transferring data from RAM to RAM in sleep mode.
gpio_blinky	Blink the on board User LEDs
gpio_int	Blink the on board User LEDs
nvic_vt_relocation	Demonstrates how to relocate the vector table.
pwm_dualedge	Demonstrates PWM in edge and single mode
pwm_matchint	Demonstrates PWM Match function in interrupt mode
pwm_singleedge	Demonstrates PWM in single edge mode
pwr_extint_sleep	Demonstrates how to enter sleep mode and wake-up by using an external interrupt.
pwr_nmi_powerdown	Demonstrates how to enter PowerDown mode and wake-up using NMI.
pwr_rtc_deeppwd	Demonstrates how to enter Deep PowerDown mode and wake-up by using the RTC.
pwr_wdt_deepsleep	Demonstrates how to enter DeepSleep mode and wake it up by using WDT Interrupt.
rit_int	Demonstrates using RIT as a timer to generate interrupt.
rtc_alarm	Simple Real Time Clock demonstration
rtc_calibration	Demonstrates how to calibrate real-time clock.
spi_sd_ffs	Demonstrates using the FAT File System with a micro SD card.
spi_sdcard	Demonstrates using SPI to read a micro SD card's CID register.
ssp_dac_test	Demonstrates the optional 4 channel 12-bit DAC.	(*)	(*)
systick_10ms	Demonstrates using systick to generate an interrupt every 10 milli-seconds.
timer_capture	Demonstrates how to use the capture timer function.
timer_freqmeasure	Demonstrates how to use the how to use timer to measure a signal's frequency.
timer_gen_diff_delay	Demonstrates how to use the timer match to generate different delay signals.
timer_gen_diff_freqs	Demonstrates how to use Timer Match to generate 2 different frequency signals.
timer_match_int	Demonstrates how to use the timer match to generate specific time in interrupt mode.
timer_poll_match	Demonstrates how to use the timer match to generate specific time in polling mode.
timer_pwmsignal	Demonstrates how to use timers to generate PWM signals with different duty cycles.
uart_autobaud	Demonstrates the auto baudrate mode in a simple UART example.
uart_dma	Demonstrates how to use the UART in DMA mode.
uart_int	Demonstrates how to use the UART in interrupt mode.
uart_polling	Demonstrates how to use the UART in polling mode.
uart_rs485_master	Demonstrates how to use the optional RS485 port in master mode.	(*)	(*)
uart_rs485_slave	Demonstrates how to use the optional RS485 port in slave mode.	(*)	(*)
usbdev_cdc	Demonstrates the USBDEV port as a virtual COM port.
usbdev_hid	USB Human Interface Device
usbdev_mass_storage	USB Device Mass Storage Demo
usb_host_msc	USB Host Mass Storage Demo
wdt_int	Demonstrates the use of WDT to generate interrupt after a specific time.
wdt_reset	Demonstrates the use of WDT to generate chip reset after avspecific time.

(*) Included with the I/O Plus option