Using Wireless USB Adapters - Revision history

Support: /* Procedure to Enable Wireless USB Adapters on Electrum100 */

Support — Tue, 17 Aug 2010 17:28:02 GMT

Procedure to Enable Wireless USB Adapters on Electrum100

← Older revision		Revision as of 17:28, 17 August 2010
Line 3:		Line 3:
	'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.		'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.

-	Electrum100 powered by a battery provides our Customers with an option to ~~Deploy the board~~ and access it without any ~~wires~~, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support. For product details visit our site at http://www.micromint.com.	+	Electrum100 powered by a battery provides our Customers with an option to deploy and access the board without any wired connections, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support. For product details visit our site at http://www.micromint.com.

Support: /* Procedure to Enable Wireless USB Adapters on Electrum100 */

Support — Thu, 17 Jun 2010 18:10:46 GMT

Procedure to Enable Wireless USB Adapters on Electrum100

← Older revision		Revision as of 18:10, 17 June 2010
Line 96:		Line 96:

	Electrum100/# ifconfig eth0 up		Electrum100/# ifconfig eth0 up
-
-
-	~~For Support contact support@micromint.com~~

Support: /* Procedure to Enable Wireless USB Adapters on Electrum100 */

Support — Thu, 17 Jun 2010 18:08:38 GMT

Procedure to Enable Wireless USB Adapters on Electrum100

← Older revision		Revision as of 18:08, 17 June 2010
Line 3:		Line 3:
	'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.		'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.

-	Electrum100 powered by a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support ~~and~~ visit our site at http://www.micromint.com ~~for product details~~.	+	Electrum100 powered by a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support. For product details visit our site at http://www.micromint.com.

Support: /* Procedure to Enable Wireless USB Adapters on Electrum100 */

Support — Thu, 17 Jun 2010 18:08:05 GMT

Procedure to Enable Wireless USB Adapters on Electrum100

← Older revision		Revision as of 18:08, 17 June 2010
Line 3:		Line 3:
	'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.		'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.

-	Electrum100 powered by a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support.	+	Electrum100 powered by a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support and visit our site at http://www.micromint.com for product details.

Support: /* Procedure to Enable Wireless USB Adapters on Electrum100 */

Support — Thu, 17 Jun 2010 18:06:24 GMT

Procedure to Enable Wireless USB Adapters on Electrum100

← Older revision		Revision as of 18:06, 17 June 2010
Line 3:		Line 3:
	'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.		'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.

-	~~'''~~Electrum100~~''' with~~ a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support.	+	Electrum100 powered by a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support.

Support: /* Procedure to Enable Wireless USB Adapters on Electrum100 */

Support — Thu, 17 Jun 2010 18:01:40 GMT

Procedure to Enable Wireless USB Adapters on Electrum100

← Older revision		Revision as of 18:01, 17 June 2010
Line 4:		Line 4:

	'''Electrum100''' with a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support.		'''Electrum100''' with a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support.
		+
		+

	The Following procedure helps in configuring the Wireless USB adapters for your Electrum100 board.		The Following procedure helps in configuring the Wireless USB adapters for your Electrum100 board.

Support: /* Procedure to Enable Wireless USB Adapters on Electrum100 */

Support — Thu, 17 Jun 2010 18:01:20 GMT

Procedure to Enable Wireless USB Adapters on Electrum100

← Older revision		Revision as of 18:01, 17 June 2010
Line 1:		Line 1:
	__TOC__		__TOC__
-	=Procedure to Enable Wireless USB Adapters on Electrum100=	+	=Procedure to Enable Wireless USB Adapters on Electrum100=
		+	'''Electrum100''' no longer needs a wired connection to communicate to the outside world. Wireless access to the board is a very convenient option for many practical scenarios where deployment is remote.

		+	'''Electrum100''' with a battery provides our Customers with an option to Deploy the board and access it without any wires, making the Deployment very easy and convenient. Feel Free to contact support@micromint.com for further queries and support.
		+
		+	The Following procedure helps in configuring the Wireless USB adapters for your Electrum100 board.
		+
	Tested on		Tested on

Support: /* Procedure to Enable Wireless USB Adapters on Electrum100 */

Support — Thu, 17 Jun 2010 14:39:07 GMT

Procedure to Enable Wireless USB Adapters on Electrum100

← Older revision		Revision as of 14:39, 17 June 2010
Line 14:		Line 14:

	CONFIG_CFG80211=y		CONFIG_CFG80211=y
-
	CONFIG_NL80211=y		CONFIG_NL80211=y
-
	CONFIG_WIRELESS_EXT=y		CONFIG_WIRELESS_EXT=y
-
	CONFIG_WIRELESS_EXT_SYSFS=y		CONFIG_WIRELESS_EXT_SYSFS=y
-

	CONFIG_MAC80211=y		CONFIG_MAC80211=y
-
	CONFIG_MAC80211_RC_PID=y		CONFIG_MAC80211_RC_PID=y
-
	CONFIG_MAC80211_RC_DEFAULT_PID=y		CONFIG_MAC80211_RC_DEFAULT_PID=y
-
	CONFIG_MAC80211_RC_DEFAULT="pid"		CONFIG_MAC80211_RC_DEFAULT="pid"

	CONFIG_WLAN_80211=y		CONFIG_WLAN_80211=y
-

	CONFIG_RT2X00=m		CONFIG_RT2X00=m
-
	CONFIG_RT2X00_LIB=m		CONFIG_RT2X00_LIB=m
-
	CONFIG_RT2X00_LIB_USB=m		CONFIG_RT2X00_LIB_USB=m
-
	CONFIG_RT2X00_LIB_FIRMWARE=y		CONFIG_RT2X00_LIB_FIRMWARE=y
-
	CONFIG_RT2X00_LIB_LEDS=y		CONFIG_RT2X00_LIB_LEDS=y

-
	CONFIG_RT73USB=m		CONFIG_RT73USB=m
-
	CONFIG_ZD1211RW=m		CONFIG_ZD1211RW=m

	CONFIG_RT73USB_LEDS=y		CONFIG_RT73USB_LEDS=y
-

	CONFIG_CRYPTO=y		CONFIG_CRYPTO=y
-
	CONFIG_CRYPTO_ALGAPI=y		CONFIG_CRYPTO_ALGAPI=y
-
	CONFIG_CRYPTO_BLKCIPHER=y		CONFIG_CRYPTO_BLKCIPHER=y
-
	CONFIG_CRYPTO_MANAGER=y		CONFIG_CRYPTO_MANAGER=y
-
	CONFIG_CRYPTO_ECB=y		CONFIG_CRYPTO_ECB=y
-
	CONFIG_CRYPTO_AES=y		CONFIG_CRYPTO_AES=y
-
	CONFIG_CRYPTO_ARC4=y		CONFIG_CRYPTO_ARC4=y
-
	CONFIG_CRYPTO_HW=y		CONFIG_CRYPTO_HW=y
-
	CONFIG_CRC_ITU_T=y		CONFIG_CRC_ITU_T=y

Support at 14:11, 16 June 2010

Support — Wed, 16 Jun 2010 14:11:35 GMT

← Older revision		Revision as of 14:11, 16 June 2010
Line 1:		Line 1:
	__TOC__		__TOC__
	=Procedure to Enable Wireless USB Adapters on Electrum100=		=Procedure to Enable Wireless USB Adapters on Electrum100=
		+
		+	Tested on
		+
		+	- LINKSYS WUSB54GC Version 1; Chipset & Driver: Ralink RT2501USB / RT73
		+
		+	- BELKIN F5D9050; Chipset & Driver: Ralink RT2501USB / RT73
		+
		+	- SMC EX Connect g 802.11g Wireless USB 2.0 Adapter; Chipset & Driver: ZyDAS / ZD1211
		+
		+
	1) Make sure that the Kernel has Configurations required to enable Wireless USB. ( In this example RT2X00, RT73USB, ZD1211 modules are enabled.)		1) Make sure that the Kernel has Configurations required to enable Wireless USB. ( In this example RT2X00, RT73USB, ZD1211 modules are enabled.)

Support at 13:59, 16 June 2010

Support — Wed, 16 Jun 2010 13:59:19 GMT

← Older revision		Revision as of 13:59, 16 June 2010
Line 59:		Line 59:
	CONFIG_CRC_ITU_T=y		CONFIG_CRC_ITU_T=y

-	2) Start Electrum100 with ~~new~~ Kernel ~~Build~~.	+	2) Start Electrum100 with the newly Built Kernel.

	3) Update the list of available packages, then install the firmware-ralink, wireless-tools, wpasupplicant packages:		3) Update the list of available packages, then install the firmware-ralink, wireless-tools, wpasupplicant packages: