Electrum-100 Manual/Getting Started - Revision history

Support: /* Updating the Bootstrap and Bootloader */

Support — Wed, 05 Jul 2017 14:47:51 GMT

Updating the Bootstrap and Bootloader

← Older revision		Revision as of 14:47, 5 July 2017
Line 359:		Line 359:
	To perform the upload follow these steps:		To perform the upload follow these steps:
	#Select "Enable Dataflash (SPIO CS1)" from the scripts listbox and click on "Execute".		#Select "Enable Dataflash (SPIO CS1)" from the scripts listbox and click on "Execute".
		+	#Select "Erase All" from the scripts listbox and click on "Execute".
	#Select "Send boot file" from the scripts listbox and click on "Execute". Select the location and filename of the bootstrap file bootstrap-df-1.11.bin .		#Select "Send boot file" from the scripts listbox and click on "Execute". Select the location and filename of the bootstrap file bootstrap-df-1.11.bin .
	#Select the location and filename of the bootloader file u-boot-df-2010.09.bin . Enter 0x4200 on the Address field and click on "Send File".		#Select the location and filename of the bootloader file u-boot-df-2010.09.bin . Enter 0x4200 on the Address field and click on "Send File".

Support: /* Updating the Linux kernel and root filesystem */

Support — Wed, 15 Jul 2015 04:04:48 GMT

Updating the Linux kernel and root filesystem

← Older revision		Revision as of 04:04, 15 July 2015
Line 258:		Line 258:
	To copy the files from an FTP server, check that the following parameters are setup in the bootloader environment.		To copy the files from an FTP server, check that the following parameters are setup in the bootloader environment.
	Electrum> printenv		Electrum> printenv
-	~~bootcmd~~= console=ttyS0,115200 root=/dev/mtdblock6 mtdparts=atmel_nand:256k(bootstrap)ro,256k(uboot)ro,256k(env1),	+	bootargs=console=ttyS0,115200 root=/dev/mtdblock6 mtdparts=atmel_nand:256k(bootstrap)ro,256k(uboot)ro,256k(env1),
	256k(env2),1024k(user),2M(linux),-(root) rw rootfstype=jffs2		256k(env2),1024k(user),2M(linux),-(root) rw rootfstype=jffs2
		+	bootcmd=nand read 0x22000000 0x200000 0x200000; bootm
	bootdelay=1		bootdelay=1
	baudrate=115200		baudrate=115200

Support: /* Toolchain installation */

Support — Wed, 21 May 2014 19:39:27 GMT

Toolchain installation

← Older revision		Revision as of 19:39, 21 May 2014
Line 59:		Line 59:

	2 Add the following line to /etc/apt/sources.list		2 Add the following line to /etc/apt/sources.list
-	deb http://www.emdebian.org/debian/ ~~lenny~~ main	+	deb http://www.emdebian.org/debian/ squeeze main

	and update the signatures		and update the signatures

Support at 20:03, 23 October 2012

Support — Tue, 23 Oct 2012 20:03:39 GMT

← Older revision		Revision as of 20:03, 23 October 2012
Line 259:		Line 259:
	Electrum> printenv		Electrum> printenv
	bootcmd= console=ttyS0,115200 root=/dev/mtdblock6 mtdparts=atmel_nand:256k(bootstrap)ro,256k(uboot)ro,256k(env1),		bootcmd= console=ttyS0,115200 root=/dev/mtdblock6 mtdparts=atmel_nand:256k(bootstrap)ro,256k(uboot)ro,256k(env1),
-	256k(env2),1024k(user),2M(linux),-(root) rw rootfstype=jffs2	+	256k(env2),1024k(user),2M(linux),-(root) rw rootfstype=jffs2
	bootdelay=1		bootdelay=1
	baudrate=115200		baudrate=115200

Support at 20:03, 23 October 2012

Support — Tue, 23 Oct 2012 20:03:03 GMT

← Older revision		Revision as of 20:03, 23 October 2012
Line 258:		Line 258:
	To copy the files from an FTP server, check that the following parameters are setup in the bootloader environment.		To copy the files from an FTP server, check that the following parameters are setup in the bootloader environment.
	Electrum> printenv		Electrum> printenv
-	bootcmd= console=ttyS0,115200 root=/dev/mtdblock6 mtdparts=~~at91_nand~~:256k(bootstrap)ro,256k(uboot)ro,~~128k~~(~~env~~)ro,	+	bootcmd= console=ttyS0,115200 root=/dev/mtdblock6 mtdparts=atmel_nand:256k(bootstrap)ro,256k(uboot)ro,256k(env1),
-	~~1536k~~(user),2M(linux),-(root) rw rootfstype=jffs2	+	256k(env2),1024k(user),2M(linux),-(root) rw rootfstype=jffs2
	bootdelay=1		bootdelay=1
	baudrate=115200		baudrate=115200

Support: /* Toolchain installation */

Support — Wed, 22 Feb 2012 15:41:53 GMT

Toolchain installation

← Older revision		Revision as of 15:41, 22 February 2012
Line 67:		Line 67:
	3. Install the following packages		3. Install the following packages
	# apt-get install linux-libc-dev-armel-cross libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi \		# apt-get install linux-libc-dev-armel-cross libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi \
-	gcc-4.3-arm-linux-gnueabi g++-4.3-arm-linux-gnueabi gdb-arm-linux-~~gnu~~ uboot-mkimage	+	gcc-4.3-arm-linux-gnueabi g++-4.3-arm-linux-gnueabi gdb-arm-linux-gnueabi uboot-mkimage

	# apt-get install apt-cross dpkg-cross		# apt-get install apt-cross dpkg-cross

Support: Undo revision 2034 by Support (Talk)

Support — Wed, 22 Feb 2012 15:40:02 GMT

Undo revision 2034 by Support (Talk)

← Older revision		Revision as of 15:40, 22 February 2012
Line 67:		Line 67:
	3. Install the following packages		3. Install the following packages
	# apt-get install linux-libc-dev-armel-cross libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi \		# apt-get install linux-libc-dev-armel-cross libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi \
-	gcc-4.3-arm-linux-gnueabi g++-4.3-arm-linux-gnueabi gdb-arm-linux-~~gnueabi~~ uboot-mkimage	+	gcc-4.3-arm-linux-gnueabi g++-4.3-arm-linux-gnueabi gdb-arm-linux-gnu uboot-mkimage

	# apt-get install apt-cross dpkg-cross		# apt-get install apt-cross dpkg-cross

Support: /* Toolchain installation */

Support — Thu, 09 Feb 2012 15:00:47 GMT

Toolchain installation

← Older revision		Revision as of 15:00, 9 February 2012
Line 67:		Line 67:
	3. Install the following packages		3. Install the following packages
	# apt-get install linux-libc-dev-armel-cross libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi \		# apt-get install linux-libc-dev-armel-cross libc6-armel-cross libc6-dev-armel-cross binutils-arm-linux-gnueabi \
-	gcc-4.3-arm-linux-gnueabi g++-4.3-arm-linux-gnueabi gdb-arm-linux-~~gnu~~ uboot-mkimage	+	gcc-4.3-arm-linux-gnueabi g++-4.3-arm-linux-gnueabi gdb-arm-linux-gnueabi uboot-mkimage

	# apt-get install apt-cross dpkg-cross		# apt-get install apt-cross dpkg-cross

Support: /* Toolchain installation */

Support — Thu, 09 Feb 2012 13:21:44 GMT

Toolchain installation

← Older revision		Revision as of 13:21, 9 February 2012
Line 79:		Line 79:

	: http://www.codesourcery.com/downloads/public/gnu_toolchain/arm-none-linux-gnueabi		: http://www.codesourcery.com/downloads/public/gnu_toolchain/arm-none-linux-gnueabi
-
-	~~These are representative commands to mount the CD and install the software on your home directory. Use the directories, username (myuser) and group (mygroup) applicable to your system.~~
-	~~$ mount /dev/cdrom /mnt/cdrom~~
-
-	~~$ cd ~~~
-	~~$ tar xfj /mnt/cdrom/tools/electrum100-bsp-2010-06.tar.bz2~~
-
-	~~$ cd electrum100~~
-	~~$ tar xfj /mnt/cdrom/tools/linux-2.6.33.5-at91.tar.bz2~~
-	~~$ sudo tar xfj /mnt/cdrom/tools/rootfs.armel.tar.bz2~~
-	~~$ unmount /mnt/cdrom~~

	The PATH change will be effective on your next login. To confirm that the toolchain is on your PATH and is working properly, try compiling a simple 'Hello' program.		The PATH change will be effective on your next login. To confirm that the toolchain is on your PATH and is working properly, try compiling a simple 'Hello' program.

Support: /* Toolchain installation */

Support — Thu, 09 Feb 2012 13:20:03 GMT

Toolchain installation

← Older revision		Revision as of 13:20, 9 February 2012
Line 49:		Line 49:

	==Toolchain installation==		==Toolchain installation==
-	To develop software for the Electrum 100, the recommended environment is a PC running x86 Linux. The Linux kernel should be 2.6.26 or above and the GCC compiler 4.3.2 or above. Debian or derivatives (including Ubuntu) are the Linux distributions directly supported by Micromint. ~~A Tools CD~~ is ~~included with~~ the ~~board that contains the following directories:~~	+	To develop software for the Electrum 100, the recommended environment is a PC running x86 Linux. The Linux kernel should be 2.6.26 or above and the GCC compiler 4.3.2 or above. Debian or derivatives (including Ubuntu) are the Linux distributions directly supported by Micromint. Board software is available for download from the Electrum Wiki.

-	~~{\| border="1" cellpadding="2" cellspacing="2" align="center"~~	+	http://wiki.micromint.com/index.php/Electrum_Documentation
-	~~\|+ align="bottom"\|''Tools CD - Directories''~~	+
-	\|-	+
-	~~!Directory~~	+
-	~~!Description~~	+
-	\|-	+
-	\|/~~boot~~	+
-	~~\|bootloader, kernel and filesystem files. These can be used to restore the board to its factory installation state.~~	+
-	\|-	+
-	\|/~~docs~~	+
-	~~\|Documentation in PDF format~~.	+
-	\|-	+
-	~~\|/drivers~~	+
-	~~\|USB drivers~~.	+
-	\|-	+
-	\|/~~licenses~~	+
-	~~\|Licenses applicable to software included on the CD~~.	+
-	\|-	+
-	\|/~~src~~	+
-	~~\|Board support package (BSP) and kernel source code~~	+
-	\|-	+
-	~~\|/tools~~	+
-	~~\|Dataflash programmer and other tools~~	+
-	\|-	+
-	~~\|/utils~~	+
-	~~\|General purpose utilities.~~	+
-	\|}	+

	The recommended toolchain is the Embedian ARM cross toolchain. To install this cross toolchain under Debian or Ubuntu distributions, follow these steps:		The recommended toolchain is the Embedian ARM cross toolchain. To install this cross toolchain under Debian or Ubuntu distributions, follow these steps: