View source

[[Category: PicoJTAG_Manual|1]]
==PicoJTAG Overview==
The Micromint picoJTAG is a low-cost debugger for ARM microcontrollers. It combines JTAG debugging with a RS-232 Virtual COM port allowing software developers to connect a debugger and serial port to a computer with a single USB cable. PicoJTAG can also provide power to targets that are capable of accepting power on the 20-pin JTAG connector. Drivers are provided for IAR, Keil and GNU toolchains supporting ARM Cortex M targets. Third party FDTI debugger drivers can be used to support other targets.

==PicoJTAG Features==
* USB2.0 (high-speed, 480Mbits/sec)  
* RS-232 Virtual COM Port
* Based on the FT2232H
* Plugs directly into Arm's standard 20-pin JTAG connector
* Capable of supplying power to targets JTAG connector

----
[[PicoJTAG_Manual/Getting_Started|NEXT: Getting Started]]

[[PicoJTAG_Manual|PREVIOUS: Table of Contents]]